Metalworking services
The modern technology of gas cutting allows making figured cutting of the steel sheet with a thickness up to 200 mm. This type of cutting is universal, as it is suitable for cutting of the sheet from 10 to 210 mm. Advantages of gas cutting:
– the cutting edge remains vertical;
– the cutting width does not exceed 2-3 mm;
– cutting of metal of large thickness.
Equipment | Thermal cutting machine RUR-2500 with the numerical program control | |
Maximum size of the sheet to be cut under the working condition: | 1 cutter | 1,8х6,0 m |
2 cutter | 6,0х2,0 | |
Thickness of the sheet to be cut | 10-210 mm | |
The accuracy of size of the contour details | According to the State Standards of the Russian Federation GOST 14792-80 | |
Surface roughness after cutting | Rz 60-80 | |
Brand material | Structural carbon steel | |
Low-alloy steel |
The plasma cutting is the most efficient and economical way of blanking metal cutting up to 20 mm. Such type of cutting has high cutting productivity, accuracy and quality. It is an effective way of cutting of the low-alloy and alloy steels, nonferrous metals and alloys.
Equipment | Plasma cutter Powermax 1650 |
Maximum sheet sizes | 6,0х1,8 m |
Thickness of the sheet to be cut | 1-18 mm |
Brand material | Carbon, alloy, stainless steel |
Non-ferrous metals and alloys (aluminium, copper, brass, titanium) | |
The accuracy of cutting | According to the State Standards of the Russian Federation GOST 14792-80 |
Vertical deviation (slant) on the faces of +/- 0.8 mm |