MUNICIPAL SOLID WASTE SORTING LINES

Processing industry

We offer a complete technical solution for sorting of municipal, commercial, non-toxic and mixed MSW (municipal solid waste). The line is used at the waste landfills or individually built plants for crushing and sorting of different waste: municipal waste, mixed waste, construction waste, organic and inorganic waste, waste paper and polymers for their further secondary use and recycling.

Our plant produces high-quality and reliable Municipal Solid Waste Sorting Lines.

Depending on selection of the technological units we can offer 8 different lines that differ in their performance and technological process. Due to an increase in the technological operations the higher line level allows us to get growing range of valuable secondary wastes.

LINE No. 1, PERFORMANCE 25 THOUS. T/YEAR

лінії сортування тпв

LINE No. 8, PERFORMANCE 100 THOUS. T/YEAR

The most productive (100 thous. t/year while working in one shift) is the Sorting Line No. 8. It has the following technological units and features:

Criteria/technological line units Location Drive Speed Speed control Dimensions Completing units Weight, t
Receiving hopper with the chain-band conveyor Hopper size 8.0×2.8×1.4 m Motor-reducer 11.5 kW, 30 r.p.m. 0.1 – 0.3 m/s Frequency converter 6,0х2.8х1.4 Emergency shutdown system 4
Infeed chain conveyor It is installed after the chain conveyor to move waste in the vertical plane Motor-reducer 5.5 kW, 90 r.p.m. 0,1 — 0,3 m/s Frequency converter length of band conveyor – 9.0 m
width of the conveyor band – 1.0 m
length of the conveyor band – 19.0 m
height of feed of the sorted material – 4.0 m
Emergency shutdown system 2
Sorting pre-selection conveyor It is located inside the cabin and passes the material from the infeed conveyor through all the sorting cabin to the exit. Motor-reducer 5.5 kW, 40 r.p.m. 0.1 – 0.3 m/s Frequency converter length of band conveyor – 10.0 m
width of the conveyor band – 1.2 m
length of the conveyor band – 21.0 m
– UV-lamp
– Lighting of each post
– Ventilation system (two fans in the box above the conveyor)
– ON/OFF buttons next to each post
– Contact isolation of the band movement
– Sandwich plate cover 50 mm
– Plastic windows
– Ladder with the entrance platform
Shredder of the garbage plastic bags It is installed in order to shred the garbage plastic bags Motor-reducer 18 kW, 150 r.p.m. length – 2.2 m
width – 2.0 m
Emergency shutdown system 3
Infeed chain conveyor It is installed after the chain conveyor to move waste in the vertical plane Motor-reducer 5.5 kW, 90 r.p.m. 0,1 — 0,3 m/s Frequency converter length of band conveyor – 9.0 m
width of the conveyor band – 1.0 m
length of the conveyor band – 19.0 m
height of feed of the sorted material 2- 4.0 m
Emergency shutdown system 2
Beater It is installed after the chain conveyor to move waste in the vertical plane Motor-reducer 7.5 kW, 40 r.p.m. Rotation frequency – up to 9.1 min-1 Frequency converter length – 6.0 m
width – 2.0 m
Two internal guide augers 4
Cross chain conveyors under the beater Two conveyors that are located under the sorting beater and designed to remove small fraction (first MSW dropout). Motor-reducer 11 kW, 100 r.p.m. length of horizontal – 6.0 m
length of inclined – 8.0 m
band width – 1.2 m
height of ejection of the sorted material – 5.0 m
Emergency shutdown system 6
Cabin with the sorting-chain conveyor Two conveyors that are located under the sorting beater and designed to remove small fraction (first MSW dropout). Sorting posts – 16, for sorting of from four to eight factions of the raw materials length – 12.0 m
width – 4.0 m
height – 2.5 m
lower height – 2.0 m
– UV-lamp
– Lighting of each post
– Ventilation system
– ON/OFF buttons next to each post
– Contact isolation of the band movement
– Sandwich plate cover 50 mm
– Plastic windows
– Ladder with the entrance platform
– Can for the material feed to the conveyor – under each post
9
Cross chain conveyors under the cabin for different fractions of the raw materials They are located under the boxes of sorting cabin and designed for sequential feed of the raw materials to the infeed conveyor of the channel press Motor-reducer 5.5 kW, 90 r.p.m. length of conveyor – 9.0 m
band width – 1.2 m
band length – 21.0 m
Emergency shutdown system 3
Longitudinal chain conveyor for the raw materials (before press) It is located in the concreted pit size 25.0*2.0*1.0 m with drainage system and designed for sequential supply of the raw materials to the channel press Motor-reducer 15.0 kW, 90 r.p.m. length – 26.0 m
band width – 1.0 m
band length – 60.0 m
height of ejection of the sorted material – 3.0 m
Emergency shutdown system 8
Infeed chain conveyor It is installed after the chain conveyor to move waste in the vertical plane Motor-reducer 5.5 kW, 90 r.p.m. 0.1 – 0.3 m/s Frequency converter length of band conveyor – 9.0 m
width of the conveyor band – 1.0 m
length of the conveyor band – 19.0 m
height of feed of the sorted material – 4.0 m
Emergency shutdown system 2
Band magnetic picker for the ferrous metals Band permanent magnet for separation of metallic particles from the gross load Motor-reducer 2.2 kW, 90 r.p.m. length – 2.3 m
width – 1.0 m
length – 0.3 m
2
Cross chain conveyor for the “tails” Welded metal structure Motor-reducer 5.5 kW, 90 r.p.m. length of conveyor – 6.0 m
band width – 1.2 m
band length – 14.0 m
height of ejection of the sorted material – 3.0 m
Emergency shutdown system 3
Containers for the valued wastes
Horizontal press